Berol OX 91-6

 
 is a non-ionic surfactant based on synthetic primary alcohol with >80% linearity. It has a hydrophilic (water soluble)  character.

 Specification

 

Limits

Method

Cloud point, 1% in water

51-58°C

AB-46-1202*

Colour

<100 Hazen

AB-46-1201*

pH, 1% in water

5-7

AB-46-1206*

*Methods of analysis can be received upon request.

 Typical data

Chemical and physical data

Typical values

Active content

100%

Appearance, 20°C

cloudy liquid

Density, 20°C

990 kg/m3

Flash point

>100°C

Pour point

8°C

Viscosity, 20°C

60 mPa·s

Water content

<0,5%

Surface active characteristics

Typical values

Foam height, according to Ross-Miles, 50°C, 0.05%

immediately: 95 mm  after 5 min: 30 mm

HLB-Value

12.5

Surface tension according to Du Noüy, 25°C, 0.1% DIN 53914

27 mN/m

Wetting power according to Draves, 25°C, 0.1%

10 sec

Solubility

The solubility of 5% Berol OX 91-6 is as follows:

Ethanol

soluble

Isopropyl alcohol

soluble

Low aromatic solvent

dispersible

Propylene glycol

soluble

Water

soluble

White spirit

dispersible

Xylene

soluble

 The specifications and properties listed above are intended for products manufactured in Europe.

 Technical Data

 Berol OX 91-6 can be used as a wetting agent and emulsifier in different cleaning products.

 Handling

 Berol OX 91-6 should always be homogenized before use, unless the entire quantity is used.   

 Further Information

 For further information, technical service and samples, please contact our nearest Akzo Nobel Sales office or  agent/distributor.