Ethylan 1008

 
 is a nonionic surfactant based on a synthetic primary alcohol.   

 Specification

 

Limits

Method

Cloud point, 1% in water

60 - 68°C

AB-46-1202*

Colour

max 100 Hazen

AB-46-1201*

pH, 1% in water

5-8

AB-46-1206*

Water content

<1%

AB-46-1208*

*Methods of analysis can be received upon request.

 Typical data

Chemical and physical data

Typical values

Active content

100%

Appearance, 20°C

clear to cloudy liquid

Clear point

21°C

Density, 20°C

1021 kg/m3

Flash point

>100°C

Pour point

12°C

Viscosity, 20°C

70 mPa·s

Surface active characteristics

Typical values

CMC, 25°C

2.0 g/l

Foam height, according to Ross-Miles, 50°C, 0.05%

immediately: 135 mm  after 5 min: 20 mm

HLB-Value according to Griffin

14

Surface tension according to Du Noüy, 25°C, 0.1% DIN 53914

29 mN/m

Wetting power according to Draves, 25°C, 0.1%

11 sec

Solubility

The solubility of Ethylan 1008 is as follows:

2-propanol

soluble

Ethanol

soluble

Low aromatic solvent

soluble

Propylene glycol

soluble

Water content

soluble

White spirit

dispersible

Xylene

soluble

 The specifications and properties listed above are intended for products manufactured in Europe.

 Technical Data

 Ethylan 1008 can be used as wetting agent and emulsifier in cleaning products.
 Ethylan 1008 is suitable in cleaning products such as liquid detergents and all-purpose cleaners.

 Handling

 Ethylan 1008 should always be homogenized before use.
 A safety data sheet is available in many languages on our website: www.se.akzonobel.com

 Further Information

 For further information, technical service and samples, please contact our nearest Akzo Nobel Sales office or  agent/distributor.